Hitless Software Upgrade Status Trap
This trap event is applicable only to products supporting HA (Mediant 500, Mediant 800, Mediant 2600, Mediant 4000, Mediant 9000, and Mediant Software).
acHitlessUpdateStatus
|
Event |
acHitlessUpdateStatus |
|
|---|---|---|
|
OID |
1.3.6.1.4.1.5003.9.10.1.21.2.0.48 |
|
|
Description |
The notification trap is sent at the beginning and end of a Hitless Software Upgrade, which is used in the High Availability system. Failure during the software upgrade also activates the trap. |
|
|
Default Severity |
Indeterminate |
|
|
Event Type |
Other (0) |
|
|
Probable Cause |
Other (0) |
|
|
Source |
Automatic Update |
|
|
Trap Text |
Condition |
Corrective Action |
|
"Hitless: Start software upgrade." |
Hitless Upgrade has begun. |
Corrective action is not required |
|
"Hitless: SW upgrade ended successfully." |
Successful Hitless Upgrade. |
Corrective action is not required |
|
"Hitless: Invalid cmp file - missing Ver parameter." |
Hitless Upgrade failed because the cmp file is invalid. The cmp file’s version parameter is incorrect. |
Replace the cmp file with a valid one. |
|
"Hitless fail: SW ver stream name too long." |
Hitless Upgrade failed because the cmp file is invalid. The number of characters defining the software version stream name in the cmp file has been exceeded. |
Replace the cmp file with a valid one |
|
"Hitless fail: Invalid cmp file - missing UPG parameter." |
Hitless Upgrade failed because the cmp file is invalid. An upgrade parameter is missing from the file. |
Replace the cmp file with a valid one. |
|
"Hitless fail: Hitless SW upgrade not supported." |
Hitless Upgrade failed because the cmp file is invalid. The cmp file does not support Hitless Upgrade of the current software version to the new software version. |
Replace the cmp file with a valid one that supports hitless upgrade of the software from the current version to the new one. |